Cold Cathode Applications:

Cold cathode may be used for direct and indirect lighting, as well as for decorative applications. Its flexibility lets you achieve many effects:

General reflected light and ambient lighting for corporate facilities, retail malls, hotel, lobbies, and hallways.
Indirect / in cove lighting for hallways, ceiling details and stairwells.
Decorative exterior lighting that outlines facades and details architectural elements.
Illuminating retail displays and commercial signage.
Color fading and backlighting for dramatic effects in lounges, nightclubs, restaurants and in retail spaces.

Cold cathode lamps can be operated either from cold cathode ballasts or high-voltage transformers, depending on the luminosity and application desired as well as the maintenance requirements.

Typical Layout:

Lamps:

The cold cathode manufacturing process consists of evacuating all ambient gases and impurities out of the tube and filling it with an inert gas and droplet of mercury. The most satisfactory gas used on high-voltage installations is argon, given its brilliant light output.

Cold cathode lamps are instant-start, using offset cylindrical electrodes. The cold cathode electrode has a very long life and, unlike the fluorescent electrode, is not affected by the number of starts. Thus, the useful life of cold cathode lamps is generally terminated by the eventual solarization of the tube rather than by electrode failure. The combination of long electrode life and durable glass tubing makes cold cathode the most economical type for low maintenance installation in the majority of hallway and ceiling-cove applications.

The luminous efficacy of cold cathode is nearly double that of incandescent lamps (above 15% vs 8%). Its higher efficiency is cost effective in two ways: lamps require less electricity and air conditioned spaces require less cooling due to lower heat output.

Lampholders:

Available lampholders include single contact for feed and/or return, and double contact for continuous run. The material is glazed porcelain with phos-copper contacts. The lampholders can operate at a maximum voltage of 7500.

Transformers:

ACC Lighting Systems uses transformers with a high current rating to assure adequate light output. These transformers are designed to support the high ambient temperature to which they may be subject .

NPF Cold Cathode Transformers 120 Volts - 60 Hz Chart

Secondary
Voltage
M.A. Transformer
Footage
Capacity
Volt - Amperes
Approximate
Watt Input
Approx. Load
Current (Amp.)

15,000 120 138 1650 855 13.75

12,000 120 109 1375 715 11.46

9,000 120 92 1080 561 9.00

7,500 120 70 900 466 7.50

5,000 120 46 600 312 5.00

800 200 One Lamp ballast 108 55 0.90

2x800 200 Two Lamps ballast 216 105 1.80

HPF Cold Cathode Transformers 120 Volts - 60 Hz Chart

Secondary
Voltage
M.A. Transformer
Footage
Capacity
Volt - Amperes
Approximate
Watt Input
Approx. Load
Current (Amp.)

15,000 120 138 900 855 7.50

12,000 120 109 775 715 6.46

9,000 120 92 600 561 5.00

7,500 120 70 900 466 4.17

5,000 120 46 500 312 2.92

Deduct 1 foot from the Footage for each pair of electrodes. Footages are based on operation in temperatures above 40° F. Deduct 25% of footage for operation below 40° F. For dimmed circuits, use next larger transformer.

Questions? Call, phone or fax. We're happy to help you.
You can order our catalogue -- simply send your information to our email:

customerservice@acclighting.com

125 Stone Henge Drive

Swedesboro, NJ 08085

USA

(856) 241-0800 (856) 241-0835

TOP OF PAGE

BACK TO ACC HOME PAGE

Secondary Voltage	M.A.	Transformer Footage	Capacity Volt - Amperes	Approximate Watt Input	Approx. Load Current (Amp.)
15,000	120	138	1650	855	13.75
12,000	120	109	1375	715	11.46
9,000	120	92	1080	561	9.00
7,500	120	70	900	466	7.50
5,000	120	46	600	312	5.00
800	200	One Lamp ballast	108	55	0.90
2x800	200	Two Lamps ballast	216	105	1.80


125 Stone Henge Drive Swedesboro, NJ 08085 USA	*(856) 241-0800*	*(856) 241-0835*